pvcell

This module contains the PVcell object which is used by modules, strings and systems.

PVcell

class pvmismatch.pvmismatch_lib.pvcell.PVcell(Rs=0.004267236774264931, Rsh=10.01226369025448, Isat1_T0=2.28618816125344e-11, Isat2=1.117455042372326e-06, Isc0_T0=6.3056, aRBD=0.0001036748445065697, bRBD=0.0, VRBD=-5.527260068445654, nRBD=3.284628553041425, Eg=1.1, alpha_Isc=0.0003551, Tcell=298.15, Ee=1.0, pvconst=<PVconstants(npts=101)>)

Class for PV cells.

Parameters:

• Rs – series resistance [ohms]
• Rsh – shunt resistance [ohms]
• Isat1_T0 – first saturation diode current at ref temp [A]
• Isat2 – second saturation diode current [A]
• Isc0_T0 – short circuit current at ref temp [A]
• aRBD – reverse breakdown coefficient 1
• bRBD – reverse breakdown coefficient 2
• VRBD – reverse breakdown voltage [V]
• nRBD – reverse breakdown exponent
• Eg – band gap [eV]
• alpha_Isc – short circuit current temp coeff [1/K]
• Tcell – cell temperature [K]
• Ee – incident effective irradiance [suns]
• pvconst (PVconstants) – configuration constants object

Aph

Photogenerated current coefficient, non-dimensional.

Ee = None

[suns] incident effective irradiance on cell

Eg = None

[eV] band gap of cSi

Icell = None

cell currents on IV curve [A]

Isat1

Diode one saturation current at Tcell in amps.

Isat1_T0 = None

[A] diode one sat. current at T0

Isat2 = None

[A] diode two saturation current

Isc0

Short circuit current at Tcell in amps.

Isc0_T0 = None

[A] short circuit current at T0

Pcell = None

cell power on IV curve [W]

Rs = None

[ohm] series resistance

Rsh = None

[ohm] shunt resistance

Tcell = None

[K] cell temperature

VRBD = None

[V] reverse breakdown voltage

Vcell = None

cell voltages on IV curve [V]

Voc

Estimate open circuit voltage of cells. Returns Voc : numpy.ndarray of float, estimated open circuit voltage

Vt

Thermal voltage in volts.

aRBD = None

reverse breakdown coefficient 1

alpha_Isc = None

[1/K] short circuit temp. coeff.

bRBD = None

reverse breakdown coefficient 2

calcCell()

Calculate cell I-V curves. Returns (Icell, Vcell, Pcell) : tuple of numpy.ndarray of float

calcIcell(Vcell)

Calculate Icell as a function of Vcell. :param Vcell: cell voltage [V] :return: Icell

calcVcell(Icell)

Calculate Vcell as a function of Icell. :param Icell: cell current [A] :return: Vcell

static f_Icell(Icell, Vcell, Isc, Aph, Rs, Vt, Isat1, Isat2, Rsh)

Objective function for Icell. :param Icell: cell current [A] :param Vcell: cell voltage [V] :param Isc: short circuit current at Tcell and Ee [A] :param Aph: photogenerated current coefficient :param Rs: series resistance [ohms] :param Vt: thermal voltage [V] :param Isat1: first diode saturation current at Tcell [A] :param Isat2: second diode saturation current [A] :param Rsh: shunt resistance [ohms] :return: residual = (Icell - Icell0) [A]

nRBD = None

reverse breakdown exponent

plot()

Plot cell I-V curve. Returns cellPlot : matplotlib.pyplot figure

pvconst = None

configuration constants

update(**kwargs)

Update user-defined constants.