Device drivers
Device drivers are handled by the terapy.hardware package.
TeraPy comes with the following drivers:
AGUC8
- Device: Newport Agilis AG-UC Motion Controller
- Driver type: axes
- Movement type: Position (um)
| Properties |
Type |
Default |
Description |
|---|
| umperunit |
float |
0.05 |
micrometer per device unit |
| stepsize |
int |
50 |
number of units to move at a time (see AG-UC documentation for more infos) |
PS10
- Device: OWIS PS10 Motion Controller
- Driver type: axes
- Movement type: Position (ps)
| Properties |
Type |
Default |
Description |
|---|
| psperunit |
float |
1.0 |
picosecond per device unit |
E3647A
- Device: Agilent E3647A Power Supply
- Driver type: axes
- Movement type: Voltage (V)
| Properties |
Type |
Default |
Description |
|---|
| |
|
|
|
ESP300
- Device: Newport ESP300 Motion Controller
- Driver type: axes
- Movement type: Position (ps)
| Properties |
Type |
Default |
Description |
|---|
| psperunit |
float |
6.6713 |
picosecond per device unit |
SMC100
- Device: Newport SMC100 Motion Controller
- Driver type: axes
- Movement type: Position (ps)
| Properties |
Type |
Default |
Description |
|---|
| psperunit |
float |
6.6713 |
picosecond per device unit |
HP34401A
- Device: HP Agilent Multimeter 34401A
- Driver type: input
- Read quantities: Voltage (V)
| Properties |
Type |
Default |
Description |
|---|
| holdoff |
float |
0.0 |
time to wait before measurement (s) |
ADWinLockIn
- Device: ADwin data acquisition hardware
- Driver type: input
- Read quantities: X (V), Y (V), R (V), Phi (°), f (Hz)
| Properties |
Type |
Default |
Description |
|---|
| signal |
|
|
|
| PHI |
|
|
|
| holdoff |
|
|
|
| amplification |
|
|
|
| inttime |
|
|
|
| mode |
|
|
|
| reftrigger |
|
|
|
| CH1_f |
|
|
|
| CH1_A |
|
|
|
| CH2_f |
|
|
|
| CH2_A |
|
|
|
| flock |
|
|
|
OphirDevice
- Device: Ophir USB interface adapter
- Driver type: input
- Read quantities: Voltage (V)
| Properties |
Type |
Default |
Description |
|---|
| holdoff |
|
|
|
| mode |
|
|
|
| pulselength |
|
|
|
| wavelength |
|
|
|
| range |
|
|
|
| MM_mode |
|
|
|
| MM_samples |
|
|
|
| frequency |
|
|
|
PXI5122
- Device: National Instruments PXI-5122 DAQ card
- Driver type: input
- Read quantities: Voltage (V)
| Properties |
Type |
Default |
Description |
|---|
| holdoff |
|
|
|
| refpos |
|
|
|
| records |
|
|
|
| trig_delay |
|
|
|
| trig_level |
|
|
|
| trig_slope |
|
|
|
| ch0_impedance |
|
|
|
| ch0_range |
|
|
|
| ch0_offset |
|
|
|
| ch1_impedance |
|
|
|
| ch1_range |
|
|
|
| ch1_offset |
|
|
|
| intmode |
|
|
|
| inttime |
|
|
|
| refmode |
|
|
|
| CH1mode |
|
|
|
| modlevel |
|
|
|
| gatewidth |
|
|
|
PXI5122LockIn
- Device: National Instruments PXI-5122 DAQ card - software lock-in amplifier
- Driver type: input
- Read quantities: X (V), Y (V), R (V), Phi (°), f (Hz)
| Properties |
Type |
Default |
Description |
|---|
| signal |
|
|
|
| PHI |
|
|
|
| holdoff |
|
|
|
| ch0_impedance |
|
|
|
| ch0_filter |
|
|
|
| ch0_range |
|
|
|
| ch0_offset |
|
|
|
| ch1_impedance |
|
|
|
| ch1_filter |
|
|
|
| ch1_range |
|
|
|
| ch1_offset |
|
|
|
| inttime |
|
|
|
SR830
- Device: Stanford Research Systems SR830 Lock-In Amplifier
- Driver type: input
- Read quantities: X (V), Y (V), R (V), Phi (°)
| Properties |
Type |
Default |
Description |
|---|
| holdoff |
float |
0.0 |
Time to wait before measurement (s) |
| automatic |
bool |
False |
If True, set hold-off time from device time constant |
